Motorola DSR-4530, Руководство оператора, Страница: 61 / 92

DSR-4530 55
Operating the DSR-4530
Audio Test Signal Menu
This menu allows the user to select an audio test signal for each of the two audio
outputs, Audio1 and Audio2. Press the
56
buttons until the Audio Test Signal menu
appears (shown below).
L1/R1 Field Default: Off
Caution: Audio output to the customers may be interrupted and test signals
override any active service component.
This field allows the user to enable the Audio1 test signal. Press the
4
button until
the cursor is at the L1/R1 label. Press the ENTER button to enter the field. Use the
56
buttons to display the three test options:
• Off
• 1000 Hz at +16 dBm
• 4040 Hz and 3960 Hz at +4 dBm
To terminate an audio test signal, use the
56
buttons to select Off and press the
ENTER button, or exit the L1/R1 field.
L2/R2 Field Default: Off
Caution: Audio output to the customers may be interrupted and test signals
override any active service component.
This field allows the user to enable the Audio 2 test signal. Press the
4
button until
the cursor is at the L2/R2 label. Press the ENTER button to enter the field. Use the
56
buttons to display the three test options:
• Off
• 1000 Hz at +16 dBm
• 4040 Hz and 3960 Hz at +4 dBm
To terminate an audio test signal, use the
56
buttons to select Off and press the
ENTER button, or exit the L2/R2 field.
E Off Off
AUDIO TEST SIGNAL L1/R1 L2/R2