manualshive.com logo in svg

Motorola DSP96002ADM, Руководство пользователя, Страница: 23 / 48

Поделиться
Скачать
Motorola DSP96002ADM Скачать руководство пользователя страница 23

 

DSP96002ADM Technical Summary

Configuring the DSP96002ADM

 

 

MOTOROLA

DSP96002ADMUM/AD, Preliminary

2-9

 

2.4.2

External IRQA/IRQB/IRQC Input Path

 

The paths for the external input signals MODA/IRQA, MODB/IRQB, and 
MODC/IRQC are selected by JG4, JG5, and JG6, respectively. These jumpers allow the 
designer to use the multiplexed function of these inputs, or to select only the interrupt 
function of these external signals. 

If JG4–JG6 have a jumper connecting pins 1–2, the external signals are ignored during 
reset. In this case, the DSP96002 uses the jumpers JG1–JG3 to determine the startup 
mode after reset. Once the mode is set, the external signals are enabled and interrupts 
received on these lines are accepted and processed. This has the advantage of assuring 
that the chip uses the appropriate startup mode by eliminating spurious interrupts and 
noise from these lines.

If JG4–JG6 have a jumper connecting pins 2–3, the external signals are connected directly 
to the MOD/IRQ pins on the DSP96002 and the multiplexed MOD/IRQ function is used 
and the setting of JG1–JG3 are ignored during reset.

 

Table 2-3

 

 gives the jumper options for the IRQA/IRQB/IRQC input paths.

 

Note:

 

The ADM is factory configured for external IRQA, IRQB, and IRQC inputs to 

be gated by the reset logic.

 

Table 2-3   

 

External IRQA/IRQB/IRQC Input Path

 

IRQx INPUT PATH

JG4 (IRQA)

JG5 (IRQB)

JG6 (IRQC)

 

Reset Logic

 1–2

 1–2

 1–2

Directly to pin

 2–3

 2–3

 2–3

Содержание DSP96002ADM

















































Отзывы:

Нет отзывов