Motorola DRC800 4-in-1, Руководство пользователя

Страница: 5 / 10

programmed to control a DVD player, VCR, DVR, or HTIB system). This makes it easier to search
for a code if your device’s code does not appear on the list provided. Your new remote allows you
to change the type of device that may be assigned to a device key. That way, if you have two TVs,
for example, you can control them both by changing the type of device the
DVD/VCR or AUDIO
modes control.
1. Press and hold a device key (i.e. AUDIO) in which you would like to reassign, until the mode
indicator lights cycle through all modes and lands back on the mode key you selected. Mode
key selected indicator light will remain on.
2. Enter code [9] [9] [2].
3. Press the device mode key you want to reassign to. That mode key’s indicator light blinks 3
times to confirm.
Note: reassigning Cable mode key is not allowed.
Assigning a key back to its original device type:
1. Press and hold the device mode key (TV, AUDIO, DVD/VCR, or Cable) you want to reset
to its original type (for ex., AUDIO) until the mode indicator lights cycle through all
modes and lands back on the mode key you selected. Mode key selected indicator light
will remain on.
2. Enter code [9] [9] [2]. The mode key’s indicator light blinks three times and turns off.
3. Press the device mode key you selected in step 1 again. The mode key’s indicator light
blinks three times and turns off.
Troubleshooting
If you have trouble with your remote, try the following steps in order.
My remote is not responding…
•
Review the information in “Using Your Remote” to make sure that the key you pressed is
active for the device you are controlling.
•
Make sure you are controlling the device you think you are. See “Using Your Remote” for
more information on choosing a device to control.
•
Make sure your batteries are good. If battery power is low, your remote enters a “Low
Battery Condition” to conserve battery power for retaining your settings. See “Installing
Batteries” for more information on changing the batteries.
•
Reset all settings
1. Press and hold a device mode key ( TV , AUDIO , DVD/ VCR , or Cable ) until the mode
indicator lights cycle through all modes and lands back on the mode key you selected.
Mode key selected indicator light will remain on.
2. Enter code [9] [8] [1]. The cable mode’s key indicator light blinks twice to indicate that
your remote is returned to its factory settings. This reset your remote to factory default
settings.