27
Removing and Replacing Your Beltclip
Removing the Beltclip
➊
Hold the pager and beltclip
in the position shown.
➋
Locate the small black
release tab as shown.
➌
Press down on the release
tab with the tip of a ballpoint
pen.
➍
While holding the release
tab down, slide the beltclip
towards the tab until the beltclip is free from the pager body.
Release tab
USE AND CAR
E
28
Replacing the Beltclip
➊
Hold the pager and beltclip in
the position shown.
➋
Align the beltclip with the
pager as shown.
➌
Slide the beltclip onto the
body until it snaps into place.
Battery Information
Your Digitz pager operates with one AAA-size alkaline battery. When the
battery is low,
lo battery
is displayed. All pager alerts change to two
seconds in length. Change your battery within five days after receiving a
low-battery indication.
Note:
The alert mode, time, and all messages (locked or unlocked) are
not retained when replacing the battery.
USE AND CAR
E/BATTER
Y
29
Replacing the Battery
➊
Turn your pager off.
➋
To remove the old battery,
slide the battery door in the
direction shown to unlock
the battery door.
➌
Lift the battery door so that
you can access the battery.
➍
Remove the battery.
➎
Align the new battery so that
the positive (+) and negative
(-) markings match the
diagram next to the battery
compartment.
➏
Insert the battery.
➐
Press down on the battery
door and slide it closed until
it locks into place.
Slide to
open
BATTER
Y
Patent Information
This Motorola product is manufactured under one or more Motorola U.S.
patents. These patent numbers are listed inside the housing of this
product. Other U.S. patents for this product are pending.
t
, Motorola, Digitz, and
F
are trademarks or registered trademarks of Motorola, Inc.
© 1997 by Motorola, Inc. All Rights Reserved.
Paging Products Group
1500 Gateway Blvd., Boynton Beach, FL 33426-8292
Printed in U.S.A. 5/97
@6881029B15@
6881029B15-A
