Diagnostics 4-21
DCT6400 Series Installation Manual
Field Description
Drive
Indicates the drive type — IDE (internal), 1394, USB (external), or NOT AVAILABLE
(neither enabled nor configured).
Record Capacity
Remaining
Indicates the remaining recording capacity, in bytes.
Hard Drive Status Page:
Hard Drive Status
Number of Installed Drives: 1
Drive: 1
INTERNAL
Model Number:
ST3120025ACE
Device ID:
N/A
Type: IDE
Total Size:
120 GB
Used
Allocated
System
1 238
MB
GPFS
2
2861
MB
PVR Content
10864
109944 MB
PVR Index
35
1431 MB
State Active
Temp (F)
118
Max Temp:
122
Over Temp
No
Count:
0
The Hard Drive Status page fields are:
Field Description
Number of
Installed Drives
The number of internal and external hard drives, up to a maximum of 9
Drive
The identification number sequentially assigned to each installed drive and whether the
drive is INTERNAL or EXTERNAL
Model Number
The model number for the drive assigned at the factory
Device ID
A text string of up to 20 characters that identifies the disk drive. “N/A” is displayed if the
value is invalid or cannot be retrieved.
Type
Indicates the drive type — IDE, 1394, USB, or Unkn(own)
Total Size
Displays the drive size in GB.
System, GPFS,
PVR Content,
and PVR Index
Displays the space used and allocated for each of the internal hard drive’s 4 partitions —
System, GPFS, PVR Content, and PVR Index — in MB for each partition. “N/A” displays if
the value is invalid or cannot be retrieved.
State
Can be:
Standby — The hard drive is working normally, but is at rest (the State returns to
Active any time disc access is necessary).
Active — The hard drive is accessing data.
Failed — The hard drive hardware has failed.
Temp (F)
For an internal hard drive
only
, its temperature in degrees F.
