Motorola CPV5300 CompactPCI Скачать руководство пользователя страница 3 | Manualshive

Страница: 3 / 78

background image

Preface

This CPV5300 Single Board Computer and Transition Module Installation and Reference
Guide describes the installation, components and configurations of the CPV5300 Single
Board Computer and CPV5300 Transition Module. Use this guide for general and technical
information about the CPV5300 CompactPCI System CPU.

Motorola

®

and the Motorola symbol are registered trademarks of Motorola, Inc.

Intel

®

and the Intel logo are registered trademarks of Intel Corporation.

Pentium

®

is a registered trademark of Intel Corporation.

MMX™ and the MMX logo are trademarks of Intel Corporation.

Windows NT

®

is a registered trademark of Microsoft in the US and other countries

CompactPCI

®

is a registered trademark of PCI Industrial Computer Manufacturers Group.

Phoenix

®

is a registered trademark of Phoenix Technologies Ltd.

All other products mentioned in this document are trademarks or registered trademarks of
their respective holders.

The software and documentation are copyrighted materials. Making unauthorized copies is
prohibited by law. No part of the software or documentation may be reproduced,
transmitted, transcribed, stored in a retrieval system, or translated into any language or
computer language, in any form or by any means without the prior written permission of
Motorola, Inc.

Disclaimer of Warranty

Unless otherwise provided by written agreement with Motorola, Inc., the software and the
documentation are provided on an “as is” basis and without warranty. This disclaimer of
warranty is in lieu of all warranties whether express, implied, or statutory, including
implied warranties of merchantability or fitness for any particular purpose.

© Copyright Motorola 1999

All Rights Reserved

Printed in the United States of America

«
1
2
3
4
5
...
»

Содержание CPV5300 CompactPCI















































































Отзывы:

Нет отзывов

Похожие инструкции для CPV5300 CompactPCI

Бренд: Yamaha Страницы: 83

KT333 DRAGON Plus

Бренд: SOYO Страницы: 34

RHINO VAP133-ACP

Бренд: Octek Страницы: 66

Бренд: Intel Страницы: 97

Бренд: JETWAY Страницы: 49

Бренд: Inrevium Страницы: 57

VIOTECH 3100 PLUS - BIOS

Бренд: Biostar Страницы: 41

AR0832MBSC25SUFAH-GEVB

Бренд: ON Semiconductor Страницы: 6

Бренд: Gigabyte Страницы: 96

Бренд: Supero Страницы: 92

PROTO1 Xplained Pro

Бренд: Atmel Страницы: 17

Бренд: Rohm Страницы: 8

Бренд: ComNav Technology Страницы: 28

Бренд: AOpen Страницы: 8

Бренд: Gigabyte Страницы: 2

Бренд: Silica Страницы: 23

Бренд: ESC Страницы: 56

Бренд: ASROCK Страницы: 74

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды