Motorola CPCI-6115, Инструкция по установке и эксплуатации

Страница: 127 / 138

8
CPCI-6115 CompactPCI Single Board Computer Installation and Use (6806800A68D)
125
Memory Maps
8.1 Overview
This chapter supplies information for use of the CPCI-6115 family of Single Board Computers
in a system configuration. Here you will find descriptions of the memory maps and software
initialization.
8.2 Memory Maps
There are three points of view for memory maps:
z
Mapping of all resources as viewed by the processor (MPU bus memory map)
z
Mapping of onboard resources as viewed by PCI local bus masters (PCI bus memory map)
z
Mapping of onboard resources as viewed by the CompactPCI bus
The following sections give a general description of the CPCI-6115 memory organization from
the above three points of view. Detailed memory maps can be found in the
MCPN905
CompactPCI Single Board Computer Programmer’s Reference Guide (MCPN905A/PG).
8.2.1 Default Processor Memory Map
The MV64360 presents a default CPU memory map following RESET negation. The following
table shows the default Memory Map from the point of view of the Processor. Address bits
[35:32] are only relevant for the MPC7457 extended address mode and are not shown in the
following tables.
Table 8-1 Default Processor Memory Map
Processor Address
Size Definition
No
tes
Start End
0000 0000 007F FFFF 8 MB DRAM Bank 0
0080 0000 00FF FFFF 8 MB DRAM Bank 1
0100 0000 017F FFFF 8 MB DRAM Bank 2
0180 0000 01FF FFFF 8 MB DRAM Bank 3
0200 0000 0FFF FFFF 224 MB Unassigned
1000 0000 11FF FFFF 32 MB PCI Bus 0 I/O Space
1200 0000 13FF FFFF 32 MB PCI Bus 0 Memory Space 0
1400 0000 1BFF FFFF 128 MB Unassigned
1C00 0000 1C7F FFFF 8 MB Device CS0*