Motorola CompactPCI CPX2000 Series, Инструкция по установке и справочник

Страница: 50 / 136

Installing the CPX2000 Series Chassis in a 19” Rack
http://www.motorola.com/computer/literature 3-9
3
7. Plug the other end of the video cable into the video connector on the
CompactPCI CPU or video card.
8. Connect the keyboard and mouse “Y” cable into their ports on the
CompactPCI CPU.
9. Plug all power cords into a grounded, surge-protected power source.
Turning on the AC System
Use this procedure to turn on an AC system.
!
Warning
Cover all open module slots and put all panels in place before
turning on power. Slot covers, panels and the front security
door must remain in place during system operation. This is
necessary to avoid electrical shock, other possible hazards;
and to properly cool the chassis.
To power-up the system:
1. Move the rocker switch on the front of the DC power supply to ON
(I) (CPX2208DC only).
2. Move the rocker switch(es) on the front of the AC power supply(ies)
to ON (I) (CPX2408 only).
3. Move the rocker switch on the front of the chassis (behind the
security door) to ON (I). The system begins its normal start-up
routine and is ready to use.