10
Getting Started
2.2
Parent unit battery installation and power supply
A rechargeable battery pack is supplied and should be fitted, so that the parent
unit can be carried to another location without losing the link with the baby
unit(s). Charge the parent unit before using it for the first time or when the
parent unit indicates that battery is low. We recommend that the unit be
charged for 15 hours prior to first use.
1.
Slide off the battery compartment cover.
2.
Insert the plug of the rechargeable battery pack into the jack inside the
battery compartment.
3.
Fit the battery pack into the compartment, with the label THIS SIDE UP
facing up.
4.
Slide the battery compartment cover back until it clicks into place.
5.
Insert the DC plug of the power adapter with the smaller DC plug into the
DC jack on the side of the parent unit.
6.
Connect the other end of the power adapter to a suitable electrical outlet.
7.
The charging indicator comes on.
NOTE
Only use the provided power adapter and battery pack.
We recommend that you install and fully charge the battery in the parent unit,
so that it continues to work if you disconnect it from the electrical outlet to carry
it to another location.
DC PLUG
DC JACK
THIS SIDE UP
