Motorola CD201 Скачать руководство пользователя страница 35 | Manualshive

Страница: 35 / 46

Motorola CD201 Скачать руководство пользователя страница 35

Help

35

9. Help

The

S

icon is not scrolling when the handset is

placed on the base

• Bad battery contact – move the handset slightly
• Dirty contact – Clean the battery contact with a cloth

moistened with alcohol

• Battery is full – no need to charge

No dialling tone

• No power – check the connections. Reset the phone:

unplug and plug back in the mains

• Batteries are empty – charge the batteries for at least 24

hours

•  You are too far from the base – move closer to the base
•  Wrong line cable – use the line cable provided
•  Line adaptor (when needed) is not connected to the line cord

– connect the line adaptor (when needed) to the line cord

Poor audio quality

The base is too close to electrical appliances, reinforced
concrete walls or metal doorframes – move the base at least
one metre away from any electrical appliances

The

E

icon is blinking

• Handset is not registered to the base – register the

handset to the base

• You are too far from the base – move closer to the base

No ring tone

• The ring tone is deactivated.
• Increase

the

volume.

Caller Line Identification (CLI) service does not
work

Check your subscription with your network operator

A phonebook entry cannot be stored

The phonebook is full. Delete an entry to free memory

No display

• Try recharging or replacing the batteries.
• Try disconnecting and connecting the base power

supply.

• If LED is not lit up, then try disconnecting and connecting

the base power supply.

Unable to register another handset

• Maximum number of 5 handsets has been reached.
• The

display

shows

SEARCHING

. You must unregister a

handset in order to register a new one.

Noise interference on your radio or television

Your base or charger may be too close. Move it as far away
as possible.

«
...
33
34
35
36
37
...
»

Содержание CD201















































Отзывы:

Нет отзывов