AP_CMM2 User Manual
Page 27 of 49
-
The modules can be mounted in a variety of locations, choose the best location
for your particular application. Modules do not have to mounted directly next to
each other, they can be distributed throughout a given site. Mounting can be done
by using stainless steel hose clamps or another equivalent fastener.
•
Mount the Cluster Management Module
-
Mount the module in a location that will allow access for service if necessary.
-
The farthest that the Access Point modules can be from the
Cluster Management Module is 328 feet (100 meters).
-
The module should not be mounted closer than 10 feet (3 meters) to the Access
Point modules or Backhaul Modules
-
The module box has flanges for ease of installation. Hardware is included to
support different mounting options:
-
Directly to a wall (screws or bolts not included)
-
Around irregular shaped objects (via adjustable stainless steel bands,
included)
-
To a pole with an outside diameter of 1.25 to 3.00 inches
(approximately 3 to 8 cm). (toothed V brackets, included).
Figure 8: Detail of pole mounting
•
Mount the GPS antenna
-
The GPS antenna must be located so that it has an unobstructed view of the sky (20-
degrees off the horizon) and is not the highest item at the installation site (for
lightning).
-
The GPS antenna mount is provided with U-bolts for pole sizes of 1.25 to 1.50 inches
(approximately 3 to 4 cm).
