PRODUCT DESCRIPTION
The Canopy Surge Suppressor has three (3) basic components as shown in
Figure 1
:
1. Mounting holes— These holes can be used for mounting unit to a surface such as an outside
wall. The distance between the centers of the holes is 4.25 inches (108 mm).
2. RJ45 connectors — One side connects to the Canopy product, the other side connects to the AC
adaptor’s Ethernet connector.
3. Ground post – use heavy gauge (10 AWG) copper wire for connection. Refer to local electrical
codes for exact specifications.
1
1
2
2
3
FIGURE 1
Page 5
