SD7505
U
ser Guide
13
Using Your C51 to Place Mobile Device Calls
The
CONNECT TO
feature of your C51 system allows you to choose a line for your
outbound calls. Your default line for outbound calls is your home telephone line (“
Base
Line
”). Your C51 system gives you the option to temporarily or permantly change the
default line to your SD7505.
To temporarily
CONNECT TO
your mobile device, instead of the
Base Line
:
1.
Press
CONNECT TO
from any C51 cordless handset or cordless phone base.
2.
Scroll to and select your SD7505. Your C51 cordless handset or cordless phone
base will now display the name of the SD7505, instead of
Base Line
. You can now
make calls through your mobile device.
NOTE:
If left idle for 60 seconds, the line reverts back to the
Base Line
setting.
Once connected to the SD7505, you can place a call through your mobile device, by:
•
Dialing the number you want to call, and pressing
ON/FLASH.
•
Choosing a phone number from a call log, and pressing
ON/FLASH.
•
Choosing a phone number from a
PRIVATE
or
SHARED
phonebook, and pressing
ON/FLASH.
NOTE:
While a call is active on the mobile device line, the SD7505 Bluetooth LED flashes
every six seconds instead of blinking every three seconds.
