35
Optional Features
QuickNotes
QuickNotes are short messages that can be displayed when you are
paged. There can be up to 5 QuickNotes stored in your pager. The person
paging you activates these messages by entering a code followed by the
rest of the message.
To receive a QuickNote, the person paging you enters ** on the keypad,
then the code, then the rest of the message. For example, if someone
paged you and entered **087, you would receive a message like this
RUNNING LATE
.
Note:
QuickNotes are subject to change. Contact your service provider
to verify the list and to make desired changes.
Code
Message
Displayed
Code
Message
Displayed
Code
Message
Displayed
087
Running Late
108
Next mtg at
107
Mtg now at
106
Mtg at
119
Delayed til
QUICKNOTES
36
Connect Function
The menu selection
CONNECT
is intended for use by service personnel only.
When selected, an alternating pattern of
cC
Cc
is displayed. To exit this
screen, press any button twice and the pager restarts.
Message and Pager Indicators
Your pager has several indicators to inform you of the status of your
messages and your pager.
Duplicate Message
When a new message is received that is identical to one already stored,
the older message is overwritten by the new one.
DUPLICATE
is displayed
before the new message and new time stamp.
Errored Data
When a message is received that might contain errors, the characters
likely to be in error flash when the message is read.
INDICATORS
37
Alarm
The alarm icon
l
is displayed when an alarm is set and flashes during the
alarm alert.
Memory Full
When the pager memory is full, for example, all message locations are
occupied,
MEM FULL
is displayed in the Standby screen until a button is
pressed. When this occurs, delete your old unwanted messages to make
room for newer messages.
MEM FULL
is also displayed if you try to move a
message into the message folder when there is not enough storage space
left.
Note:
If you don’t delete any old messages, the pager automatically
deletes the oldest read message to make room for the new
message.
INDICATORS
38
Low Battery
When the voltage of the pager’s battery drops below a certain level,
b
is
displayed on all screens, even when the pager is off. The low-battery
condition is displayed until the battery is replaced.
Note:
Check your pager’s clock time after replacing the battery.
Belt Clip
Your pager has a removable belt clip. To remove and replace the belt clip,
follow the instructions below.
Removing the Belt Clip
➊
Insert the pointed end of a non-metallic
tool (such as a pen cap) into the top
end of the belt clip as shown in the
illustration.
➋
Push upward on the tab and slide the
belt clip forward to separate it from the
pager.
Lift tab to
release
belt clip
BELT CLIP