Motorola Bell VIP1200, Справочное руководство

Страница: 22 / 32

22
Setting up your
wireless settings
Before you begin, be sure to write down the 8 digit WPA2 key, as indicated on
the back of the modem as you will need this to set up your wireless settings.
Windows® 7
• Click on the wireless bar located at the right hand side of the system bar.
• The list of available wireless networks appears with your network name.
Click Refresh network list if yours does not appear.
• Select your network name, and click
Connect
.
• Type your 8-digit WPA2 key in the
Security key
box, click
ok
.
Windows Vista®
• Click
Start
, then
Connect to
.
• Your network name will appear. If not, click the two arrows in the top right
corner.
• Type your 8-digit WPA2 key in the Security key or Passphrase text box.
• Click
Connect
.
Windows XP®
• Click the Wireless networks detected message or double-click
the icon in your system (located on the bottom right-hand side near
the clock).
• Your network name will appear. Double click it.
• In the wireless network connection box, type in your 8-digit WPA2 key.
• Click
Connect
.
Mac 10.4 – 10.6
• Click on the airport icon.
• Your network name will appear. If not, click the
airport
icon again.
• Click on your network name in the list.
• Type your 8-digit WPA2 key in the
Password
text box.
• Click ok .
For more information on creating a Wireless Home Network,
visit
bell.ca/fibetvwireless.
BBLP10-013 Fibe TV Ref_guide_E.indd 22 10-04-26 13:46