Figure 2:
(1) Link LED. (2) Connection Status LED.
LED Indicator
Description
Off
The recorder is not connected to a network.
Link LED is green
The recorder is connected to a network at the maximum port
speed (1 Gbps or 10 Gbps).
Link LED is orange
The recorder is connected to a network at less than the
maximum port speed.
Connection Status LED is blinking green
The recorder is working with other parts of the Avigilon Control
Center software.
Hard Drive RAID Status Indicators
Each hard drive has its own set of LED indicators to show its activity and status.
Figure 3:
(1) Status LED. (2) Activity LED.
The Activity LED flashes green when the hard drives are working. The following table describes what the
Status LEDs indicate:
LED Indicator
Description
Green
The hard drive is online.
Off
The hard drive is disconnected from the recorder.
Two short green flashes every second
The system is identifying a new hard drive, or preparing a hard
drive for removal.
Flashes green, orange then off
The hard drive is predicted to fail.
Four short orange flashes per second
The hard drive has failed.
Flashes green slowly
The hard drive is rebuilding.
Hard Drive RAID Status Indicators
8
