Figure 2:
Releasing the clamp from ready position.
Installing the Dome Cover
1. Align the notches on the dome cover with the release tab on the base. The dome cover should be
flush against the camera base.
2. Slide the dome cover clockwise until it locks into place.
Note:
Be careful not to scratch the dome bubble.
For More Information
Additional information about setting up and using the device is available in the following guides:
l
Avigilon Control Center Client User Guide
l
Web Interface User Guide — Avigilon High Definition H4 and H5 IP Cameras
l
Avigilon USB Wi-Fi Adapter System User Guide
l
Avigilon Camera Configuration Tool User Guide
l
Designing a Site with Avigilon Video Analytics
These guides are available on
and on the Avigilon website:
Installing the Dome Cover
12
