Motorola ASTRO MT 1500 Скачать руководство пользователя страница 42

Страница: 42 / 82

Common Radio Features

The radio operates in the normal dispatch manner while in
Emergency Call, except, if enabled, it will return to one of the
following:

Note:

For ALL Emergency signals:

• You can change channels while in Emergency operation if the

new channel is also programmed for Emergency. The
emergency alarm or call continues on the new channel.

• If the new channel is NOT programmed for Emergency, an

invalid tone sounds until you exit the Emergency state or
change to a channel programmed for emergency.

Press and hold the

PTT

button and announce your
emergency into the
microphone.

Release the

PTT

button to

end the transmission and
wait for a response from the
dispatcher.

Press and hold the

Emergency

button for about

a second to exit emergency.

Using this operation:

Means you will talk:

Tactical/Non-
Revert

on the channel you
selected before you
entered the emergency
state.

Non-Tactical/
Revert

on a preprogrammed
emergency channel. The
emergency alarm is sent
to this same channel.

MT1500 1.5 UG.book Page 30 Thursday, May 8, 2008 11:17 AM

Содержание ASTRO MT 1500



















































































Результаты поиска

Содержание ASTRO MT 1500

Отзывы:

Motorola ASTRO MT 1500, Руководство пользователя, Страница: 42 / 82

Результаты поиска

Содержание ASTRO MT 1500

Отзывы: