Motorola ASTRO APX O5 Скачать руководство пользователя страница 32

Страница: 32 / 166

Accy No-Dot Button (Purple)

[2]

Accy 1-Dot Button

[2]

Accy 2-Dot Button

[2]

(Quick
Access)
One Touch
Button

Enters a menu with a short press on
the preprogrammed One Touch
button. Features assigned to these
buttons are Call, Call Alert, Phone,
Repeater Access, MDC RTT Button
Access, Status and Message.

Home Button

Pressing the

button returns you to the Home

(default) screen. In most cases, this is the current
mode. For selected radio features, the

button is

also used to save user-edited radio settings or
information before returning you to the Home screen.

Note:

Some features do not require you to press
to go to the Home screen. Refer to the

individual feature sections in this manual for
further details on saving user-edited radio
settings or information.

The

button also can revert to home channel from

any other zone and mode in the radio. Check with
your dealer or system administrator for more
information.

4-Way Navigation Button

Use the

4-Way Navigation Button

to scroll up, down,

left or right with one of the following methods.

• Press and release one of the button to scroll from

one entry to the next one.

• Press and hold one of the button to have the radio

toggles through the list automatically (release the
button to stop).

Data Feature Button

Use

Data Feature

button to access data-related

features, such as the Text Messaging Service (TMS)
feature screen.

These programmable buttons support the

One Touch Button

feature.

Identifying Radio Controls

English

Содержание ASTRO APX O5







































































































































































Результаты поиска

Содержание ASTRO APX O5

Отзывы:

Похожие инструкции для ASTRO APX O5

Бренды по названию

Популярные бренды

Motorola ASTRO APX O5, Руководство пользователя

Результаты поиска

Содержание ASTRO APX O5

Отзывы:

Похожие инструкции для ASTRO APX O5

Бренды по названию

Популярные бренды