English
Sending an Emergency Alarm
To exit emergency at any time, press and hold the
Emergency
button.
Sending an Emergency Call (Trunking
Only)
To exit emergency at any time, press and hold the
Emergency
button.
Sending a Silent Emergency Alarm
If silent emergency alarm is used with emergency call,
pressing the
PTT
button exits the silent mode and
initiates the emergency call.
Display Status Icons
1
Press the
Emergency
button. A tone sounds
and the display shows
EMERGENCY
and the
current zone or channel.
2
A dispatcher acknowledgment
ACK
RECEIVED
display follows.
AND, Trunking Only:
A high-pitched tone indicates that the alarm
has been received by the trunked system’s
central controller.
3
Press and hold the emergency button or the
PTT
button to return to normal operation.
1
Press the
Emergency
button.
1
A tone sounds and the display shows
EMERGENCY
and the current zone or channel.
OR
A talk prohibited tone sounds when the
selected channel does not support
emergency.
2
Press and hold the
PTT
button. Speak clearly
into the microphone.
3
Release the
PTT
to end the transmission.
1
Press the
Emergency
button to activate the
silent alarm feature.
2
The display does not change; the LED does
not light up, and there is no tone.
Receiving a call or data
Transmitting a call or data
Received an Individual Call.
The more stripes, the stronger the
signal strength for the current site
(trunking only).
Direct radio to radio communication or
connected through a repeater.
On
= Direct
Off
= Repeater
This channel is being monitored.
Voice muting the affiliated trunking
talkgroup or selected conventional
channel.
On
= Enabled
Off
= Disabled
L
= Radio is set at Low power.
H
= Radio is set at High power.
Scanning a scan list.
Blinking dot
= Detects activity on the
Priority-One Channel
during scan.
Steady dot
= Detects activity on the
Priority-Two Channel
during scan.
F
O
M
K
H
OR
.
i
Radio is in the view or program mode.
On steady
= View mode.
Blinking
= Program mode.
The vote scan feature is enabled.
On
= Secure operation.
Off
= Clear operation.
Blinking
= Receiving an encrypted
voice call.
On
= AES Secure operation.
Off
= Clear operation.
Blinking
= Receiving an encrypted
voice call.
On
= Location feature enabled, and
location signal available.
Off
= Location feature disabled.
Blinking
= Location feature enabled,
but location signal
unavailable.
On
= User is currently associated with
the radio.
Off
= User is currently not associated
with the radio.
Blinking
= Device registration or user
registration with the server
failed due to an invalid
username or pin.
Data activity is present.
Indicates that the text entry is currently
in hexadecimal mode.
Alternates between red and blue when
the lightbar is on.
k
m
l
G
n
o
Menu Navigation
<
or
>
to Menu
Entry.
-
directly below
Menu Entry to select.
U
or
D
to scroll
through sub-list.
-
directly below
Menu Entry to select.
H
to exit.
QR-Card.fm Page 4 Thursday, June 17, 2010 2:03 PM
