Motorola ASTRO 25, Руководство пользователя

Страница: 26 / 36

Troubleshooting Hints
FLASHport User’s Guide
22
Failed to enter into Program
Mode Error while trying to put the radio in program
mode. Most likely a communication problem
occurred. Check for loose cables. Request user
to retry the upgrade. If the problem persists, try
using a different cable or computer.
Unable to read the RSSI
DSP Offset from the tuning
partition
This error happens only in mobile ASTRO Spec-
tra Plus radios. It will not cause the upgrade to
abort. The upgrade will continue anyways.
When the upgrade completes, if the tuning parti-
tion was upgraded (see the status of the
FLASHport upgrade) then the radio may need a
cpfix solution to fix a value in the tuning partition
that can cause issues with radio operation.
Unable to reprogram the
RSSI DSP Offset to the tun-
ing partition This error could happen only in mobile ASTRO
Spectra Plus radios. It will not cause the
upgrade to abort. The upgrade will continue
anyways. When the upgrade completes, if the
tuning partition was upgraded (see the status of
the FLASHport upgrade) then the radio may
need a cpfix solution to fix a value in the tuning
partition that can cause issues with radio opera-
tion.
Error encountered during
flash radio This error indicates that the was unable to com-
pletely upgrade the radio. Most likely a commu-
nication problem occurred. Check for loose
cables. Request user to retry the upgrade. If the
problem persists, try using a different cable or
computer.
Error encountered in update
firmware This error indicates that the was unable to
upgrade one of the components in the radio.
Most likely a communication problem occurred.
Check for loose cables. Request user to retry
the upgrade. If the problem persists, try using a
different cable or computer.
94C35_Book.book Page 22 Thursday, June 2, 2005 3:10 PM