manualshive.com logo in svg

Motorola ASTRO 25 GTR 8000, Руководство пользователя, Страница: 38 / 309

Поделиться
Скачать
Motorola ASTRO 25 GTR 8000 Скачать руководство пользователя страница 38

• Simulcast

• Console Control

- Monitor Mode

- Repeat Control

- Frequency Select

* For detailed information on the differences between the automatic 

Fallback In-Cabinet Repeat

 and

the externally wired 

In-Cabinet Repeat

 functions, see the 

Conventional Operations

 manual.

An analog conventional base radio can be used in the following architectures:

• ASTRO

®

 3.1 Conventional Systems

• Centralized Conventional Architectures

- Zone Core with Colocated Conventional Channels

- Trunked IP Simulcast Remote Site Conventional Channels

- Dispatch Console Site with Colocated Conventional Channels

- Conventional-Only Remote Site

• Distributed Conventional (Subsystem) Architectures

- Conventional Base Radio Sites

- Conventional Hub Sites

1.9

Overview of a GTR 8000 Base Radio in a Trunked 3600 System

In a trunked 3600 system, the GTR 8000 Base Radio control channel runs at 3600 bps, and the voice
channels can be configured for analog or ASTRO

®

 25 voice operation.

The base radio can be used in the following trunked 3600 SmartZone

®

 systems:

• Trunked SmartX – 6809/MTC 3600 Site Controller Simulcast Subsystem

Depending on the system capabilities, each base radio can be configured for analog voice (4-wire
interface), digital voice (V.24 interface) or mixed-mode (4-wire and V.24 interfaces). These interfaces
connect to either a channel bank or ASTRO-TAC 3000 Comparator.

The base radio is available in the following frequency bands:

• 800 MHz

• UHF R1 (380–435 MHz)

• UHF R2 (435–524 MHz)

• VHF (136–174 MHz)

NOTICE: 

A GTR 8000 Base Radio can be implemented as a QUANTAR

®

 replacement within a

trunked 3600 SmartZone

®

 system. The implementation details can be found in the 

Quick Guide

for Replacing a Trunked 3600 QUANTAR with a GTR 8000 Base Radio

 manual.

1.10

Power Efficiency Package

The GTR 8000 Base Radio is available in a Power Efficiency Package, which provides low standby
power consumption (see 

Table 2: Standby Power Consumption on page 39

) functionality for ASTRO

®

25 Conventional base radios and trunked base radios operating in the UHF-R1 and UHF-R2 frequency
bands. The Power Efficiency Package optimizes the power consumption for supported base radios for
the use of power generated from alternate energy sources such as solar or wind.

MN003286A01-E
Chapter 1:  GTR 8000 Base Radio Description

38  

Содержание ASTRO 25 GTR 8000






















































































































































































































































































































Отзывы:

Нет отзывов