![background image](http://html.mh-extra.com/html/motorola/arris-surfboard-sbm1000-series/arris-surfboard-sbm1000-series_user-manual_17680040.webp)
Installing the MoCA Adapters
SBM1000 SMART Video Adapter Kit
•
User Guide
32
590631-001-a
5.
Connect a second coaxial cable (included) to the
Coax In
connector on the SBM1400 and to
the
OUT
connector that is NOT marked with a red line on the RF splitter (see figure above).
WARNING!
Connecting the MoCA adapter to the wrong
OUT
connector on the RF
splitter may damage the MoCA adapter.
6.
Connect one of the Ethernet cables (included) to one of the
Ethernet
ports on the SBM1400
and the
Ethernet/Network
port on your Smart TV or other Smart device (see Figure 27).
Repeat for each additional SBM1400 Ethernet connection with other networked audio-visual
devices, if applicable.
7.
Connect one of the power adapters (included) to the
Power
port on the SBM1400 and plug it
into the electrical wall outlet.
To install the SBM1100 (see Room 2 in Figure 27):
8.
Disconnect the coaxial cable from the
In
port on your Satellite receiver and connect it to the
IN
connector on one of the RF splitters (included).
Note
: If Room 2 does not include a Satellite receiver, then skip steps 9 and 10 and connect a
coaxial cable to the Satellite coaxial wall outlet and the
Coax In
connector on the SBM1100.
9.
Connect one of the coaxial cables (included) to the
In
port on the Satellite receiver and the
OUT
connector marked with a
red
line on the RF splitter.
10.
Connect a second coaxial cable to the
Coax In
connector on the SBM1100 and one of the
OUT
connectors on the RF splitter (included) that is NOT marked with a red line.
11.
Connect one of the Ethernet cables (included) to the
Ethernet
port on the SBM1100 and one
of the
LAN Ethernet/network
ports on your gateway/router.
12.
Connect one of the power adapters (included) to the
Power
port on the SBM1100 and plug it
into an electrical wall outlet.
ο
The
Coax
LEDs on both MoCA adapters should turn ON within five minutes to indicate
that a secure coaxial connection was established between the two adapters.
ο
If the
Coax
LED does not turn ON within five minutes, disconnect and then reconnect
the power adapters on the SBM1100 and SBM1400. If the
Coax
LEDs still fail to turn
ON, see
13.
Power ON your Smart TV, set-top box, laptop, and any other Ethernet-connected devices.
You can now configure your Smart TV and other Ethernet-enabled devices for Internet access
through their related user interfaces.
See