Motorola APX 400Li Скачать руководство пользователя страница 52

Страница: 52 / 90

The radio continues scanning the remaining channels
in the list.

Restoring a Nuisance Channel

To restore the deleted nuisance channel, perform
one of the following actions:

• Turn scan off, and then on.
• Change channels.
• Turn off the radio, and then turn it back on.

Nuisance mode delete can be disabled by the
system administrator.

Call Alert Paging

This feature allows your radio to work like a pager.

The radio which you missed its call can send a Call
Alert page to your radio. The sender also able to
know that your radio is active.

Note:

This feature must be preprogrammed by a

qualified radio technician.

Receiving a Call Alert Page

When you receive a Call Alert page, you hear four
repeating alert tones and the LED blinks green. The

call received icons blinks and the display shows

Page

received

Press any button to clear the Call Alert page.

You cannot send a Call Alert page.

Emergency Operation

The Emergency feature is used to indicate a critical
situation.

If the

Top (Orange)

button is preprogrammed to send

an emergency signal, this signal overrides any other
communication over the selected channel.

Your radio supports the following Emergency modes:

• Emergency Alarm
• Emergency Call (Trunking Only)
• Emergency Alarm with Emergency Call
• Silent Emergency Alarm

Check with your dealer or system administrator for
more information on the programming of this feature.

Only

one

of the Emergency modes above can be

assigned to the preprogrammed

Emergency

button.

Advanced Features

English

Содержание APX 400Li



























































































Результаты поиска

Содержание APX 400Li

Отзывы:

Похожие инструкции для APX 400Li

Бренды по названию

Популярные бренды

Motorola APX 400Li, Руководство пользователя

Результаты поиска

Содержание APX 400Li

Отзывы:

Похожие инструкции для APX 400Li

Бренды по названию

Популярные бренды