manualshive.com logo in svg

Motorola APX 4000, Базовое руководство по обслуживанию

"Motorola APX 4000" - портативная радиостанция с уникальными функциями для безопасной коммуникации. Basics Service Manual доступен для скачивания бесплатно на manualshive.com. Идеальное решение для профессионалов в сфере коммуникации. Подробный мануал поможет настроить и использовать устройство эффективно и безопасно.

Поделиться
Скачать
background image

Foreword

This manual covers all models of the ASTRO

®

 APX

TM

1000/APX

TM

2000/APX

TM

4000/APX

TM

4000 Li digital portable 

radio, unless otherwise specified. It includes all the information necessary to maintain peak product performance and 
maximum working time, using levels 1 and 2 maintenance procedures. This level of service goes down to the board 
replacement level and is typical of some local service centers, self-maintained customers, and distributors.

For details on radio operation or component-level troubleshooting, refer to the applicable manuals available separately. A 
list of related publications is provided in the section, 

“ Related Publications”

 on 

page vi.

Product Safety and RF Exposure Compliance

ATTENTION!

This radio is restricted to occupational use only to satisfy FCC RF energy exposure requirements. 
Before using this product, read the guide enclosed with your radio which contains important operating 
instructions for safe usage and RF energy awareness and control for compliance and applicable 
standards and regulations.

For a list of Motorola-approved antennas, batteries, and other accessories, visit the following 
web site: www.motorolasolutions.com/APX

Manual Revisions

Changes which occur after this manual is printed are described in FMRs (Florida Manual Revisions). These FMRs provide 
complete replacement pages for all added, changed, and deleted items, including pertinent parts list data, schematics, and 
component layout diagrams. To obtain FMRs, contact the Customer Care and Services Division (refer to 

“Appendix B 

Replacement Parts Ordering”

).

Computer Software Copyrights

The Motorola products described in this manual may include copyrighted Motorola computer programs stored in 
semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain 
exclusive rights for copyrighted computer programs, including, but not limited to, the exclusive right to copy or reproduce in 
any form the copyrighted computer program. Accordingly, any copyrighted Motorola computer programs contained in the 
Motorola products described in this manual may not be copied, reproduced, modified, reverse-engineered, or distributed in 
any manner without the express written permission of Motorola. Furthermore, the purchase of Motorola products shall not 
be deemed to grant either directly or by implication, estoppel, or otherwise, any license under the copyrights, patents or 
patent applications of Motorola, except for the normal non-exclusive license to use that arises by operation of law in the 
sale of a product.

Document Copyrights

No duplication or distribution of this document or any portion thereof shall take place without the express written permission 
of Motorola. No part of this manual may be reproduced, distributed, or transmitted in any form or by any means, electronic 
or mechanical, for any purpose without the express written permission of Motorola.

Disclaimer

The information in this document is carefully examined, and is believed to be entirely reliable. However, no responsibility is 
assumed for inaccuracies. Furthermore, Motorola reserves the right to make changes to any products herein to improve 
readability, function, or design. Motorola does not assume any liability arising out of the applications or use of any product 
or circuit described herein; nor does it cover any license under its patent rights nor the rights of others.

Trademarks

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M logo are trademarks or registered trademarks of 
Motorola Trademark Holdings, LLC and are used under license. All other trademarks are the property of their respective 
owners. © 2011–2014 Motorola Solutions, Inc. All rights reserved.

Before using this product, read the operating instructions 
for safe usage contained in the Product Safety and RF 
Exposure booklet enclosed with your radio.

!

C a u t i o n

Содержание APX 4000















































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для APX 4000

Jabra SOLEMATE MAX Quick Start Manual preview
SOLEMATE MAX
Бренд: Jabra Страницы: 2
Magnavox MPD820 - DVD Player - 8 User Manual preview
MPD820 - DVD Player - 8
Бренд: Magnavox Страницы: 42
VEF R-1 User Manual preview
R-1
Бренд: VEF Страницы: 3
Bang & Olufsen Beosound A5 User Manual preview
Beosound A5
Бренд: Bang & Olufsen Страницы: 213
Yaesu FT-726R Operating Manual preview
FT-726R
Бренд: Yaesu Страницы: 43
Nextech 8011410 Instruction Manual preview
8011410
Бренд: Nextech Страницы: 12
Wacker Neuson GPS 8500 Repair Manual preview
GPS 8500
Бренд: Wacker Neuson Страницы: 60
MAJORITY SHELFORD II SEL-DAB-CRM-2 UK Instruction Manual preview
SHELFORD II SEL-DAB-CRM-2 UK
Бренд: MAJORITY Страницы: 24
Radio Shack 20-228 Owner'S Manual preview
20-228
Бренд: Radio Shack Страницы: 48
SBO Hearing SBO BTE SP Quick Installation Manual preview
SBO BTE SP
Бренд: SBO Hearing Страницы: 4
VDH Products PROBA Installation And Operating Manual preview
PROBA
Бренд: VDH Products Страницы: 78
C. Crane CCWIFI 2 Instruction Manual preview
CCWIFI 2
Бренд: C. Crane Страницы: 35
Kohler 4EF Service Manual preview
4EF
Бренд: Kohler Страницы: 72
Sangean DPR-17 Manual preview
DPR-17
Бренд: Sangean Страницы: 151
Philips PET1031 Specifications preview
PET1031
Бренд: Philips Страницы: 3
DMB HEPBURN MK-II Quick Start Manual preview
HEPBURN MK-II
Бренд: DMB Страницы: 24
BTECH DMR-6X2 Programming Manual preview
DMR-6X2
Бренд: BTECH Страницы: 30
Silvercrest SFG 8000 B1 Quick Start Manual preview
SFG 8000 B1
Бренд: Silvercrest Страницы: 2

Бренды по названию

Популярные бренды

Загрузить еще бренды