Motorola A780 Скачать руководство пользователя страница 31 | Manualshive

Страница: 31 / 48

Motorola A780 Скачать руководство пользователя страница 31

6809488A90

September 20, 2004

29

Level 1 and 2 Service Manual

Disassembly

Removing and Replacing the Stand_Joystick Assembly

1.

Remove the battery cover, battery, SIM card, stylus, rear housing and the
transceiver board assembly as described in the procedures

.

2.

Carefully disengage the 2 metal clips securing the stand_joystick assembly to
the transceiver board.

3.

Carefully work the flat end of the disassembly tool under the flex connector
and remove the connector from the transceiver board. See Figure 13. (Note: It
is not necessary to remove the LCD display, it has been removed in Figure 13
for clarity)

.

4.

To replace, insert the flex connector squarely into its mating connector on the
transceiver board and press firmly until it snaps into place. Position the
stand_joystick assembly over the bottom end of the transceiver board and snap
the 2 metal clips onto the sides of the transceiver board.

5.

Replace the transceiver board, rear housing, SIM card, stylus, battery, and
battery cover as described in the procedures.

G

The flexible printed cable (FPC) (flex) is easily damaged. Exercise extreme care when
handling.

Figure 13. Disconnecting the Stand_Joystick Assembly from the Transceiver
Board

Metal Clips

Flex Connector

«
...
29
30
31
32
33
...
»

Содержание A780

















































Отзывы:

Нет отзывов