manualshive.com logo in svg

Motorola 8900 - Blackberry Curve Cell Phone OEM Car Charger, Руководство разработчика

Поделиться
Скачать
Motorola 8900 - Blackberry Curve Cell Phone OEM Car Charger Скачать руководство пользователя страница 3

Usage and Disclosure Restrictions

License Agreements

The software described in this document is the property of Motorola, Inc. and its licensors. It is furnished by express license 
agreement only and may be used only in accordance with the terms of such an agreement.

Copyrighted Materials

Software and documentation are copyrighted materials. Making unauthorized copies is prohibited by law. No part of the software 
or documentation may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or 
computer language, in any form or by any means, without prior written permission of Motorola, Inc.

High Risk Materials

Components, units, or third-party products used in the product described herein are NOT fault-tolerant and are NOT designed, 
manufactured, or intended for use as on-line control equipment in the following hazardous environments requiring fail-safe 
controls: the operation of Nuclear Facilities, Aircraft Navigation or Aircraft Communication Systems, Air Traffic Control, Life 
Support, or Weapons Systems (High Risk Activities"). Motorola and its supplier(s) specifically disclaim any expressed or implied 
warranty of fitness for such High Risk Activities.

Trademarks

 

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are 
the property of their respective owners. 
© Copyright 2008 Motorola, Inc. 
 

REV052604

Содержание 8900 - Blackberry Curve Cell Phone OEM Car Charger



































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды