manualshive.com logo in svg

Motorola 7545MBW, Руководство пользователя

Поделиться
Скачать
Motorola 7545MBW Скачать руководство пользователя страница 171

Accessories

4 - 13

Charging a Battery Installed in the Omnii

•

Insert the DC power cable to the DC IN port on the desktop docking station. Plug the pronged end of the 
cable into an AC outlet.

•

Slide the hand-held into the docking station, making certain that the hand-held is securely seated on the 
docking station connector pins and engages the locking arms of the docking station. When the Omnii is 
switched on, a message is displayed briefly on the screen indicating that the unit is properly installed in the 
station and the docking station icon is displayed in the taskbar.

The LED on the Omnii lights up indicating that the unit has external power and battery charging will begin. It is 
safe to leave the unit in the desktop docking station while it is not in use — the battery will not be overcharged.

Indicators

The front-mounted LED on the desktop docking station indicates the spare battery charge status. The LED on 
the Omnii is active even when the hand-held is inserted in a docking station (and in suspend mode) so that the 
charge status of the battery can be detected easily.

Operation 

Charging the Omnii Battery

The desktop docking station supplies DC power to enable the Omnii internal fast charger.

When installed in the dock, the Omnii battery charge LED will illuminate to indicate the unit has external power 
and can charge the internal battery. The Omnii charge indication follows the same convention as the charger's 
spare battery indicator (

Figure 4-9 Desktop Docking Station - Models ST4002 and ST4003  on page 4-12

).

Charging the Spare Battery

•

Install the battery in the battery charging bay (rear slot of the desktop docking station). Place the battery 
contacts down to mate with the connector, and pivot the battery into place in the battery charging bay.

•

The desktop docking station spare battery LED lights up immediately. During charge the LED will be 
flashing green. 

•

When the battery has finished charging, the LED turns solid green.

•

The charge stops when the battery is fully charged and the LED remains green.

Charge LED Behaviour

Function

OFF

No battery detected.

Solid Green

Battery charging complete.

Flashing Green

Charge in progress.

Flashing Yellow

Battery is not charging due to out-of-temperature conditions.

Solid Red

A charging timeout, unable to read battery, or non Motorola 
battery.

NOTE

Battery charging continues whether the Omnii is switched on or off.

IMPORTANT

Do not store spare batteries in a charger for more than 72 hours. Doing so 
may damage the battery or reduce its charge capacity. 

Содержание 7545MBW



















































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды