13
VIII. Simple fault analysis and elimination / Troubleshooting
With regard to small faults, not every failure needs to be fixed by the technical service personnel; you can try to
solve the problem.
Case
Inspection
Solutions
•
Completely
non-
refrigeration
•Is the power plug off?
•Are breakers and fuses broken?
•No electricity or line trip?
•Re-plug
•Opening the door and checking whether the lamp
is lit.
•
Abnormal
noise
•Is the refrigerator stable?
•Does the refrigerator touch the
wall?
•Adjusting refrigerator's leveling feet.
•Off the wall.
•
Poor
refrigerating
efficiency
•Did you put hot food or too much
food?
•Did you open the door
frequently?
•Did you clip the food bag to the
door gasket?
•Direct sunlight or near a furnace
or stove?
•Is it well-ventilated?
•Temperature setting is too high?
•Putting food into the refrigerator when hot food
becomes cold.
•Checking and closing the door.
•Removing the refrigerator from the heat source.
•Emptying the space to maintain good ventilation.
。
•Setting at the appropriate temperature.
•
Peculiar smell
in refrigerator
•Any spoiled food?
•Did you need to clean the
refrigerator?
•Have you packed food with
strong flavors?
•Throwing away spoiled food.
•Cleaning refrigerator.
•Packing food with strong flavors.
•
No key
response
•Check whether the Child Lock
function is enabled on the display
panel.
•Press & hold the "Unlock" key for 3 seconds to
unlock the key, and then conduct the key operation.
(For details, refer to the Child Key function.)
•
Temperature
setting not
happening
•Check whether the Smart or Fast
Freeze function is enabled on the
display panel.
•Exit the special function mode, and then set up the
temperature (for details refer to the Functions
section)
•
Freezer
temperature
displayed on
the panel, with
the
temperature
digits flashing
•Is power cut before?
•Press any key to lift the alarm (refer to the
Overtemperature alarm function), and then check
the foods inside the fridge and freezer
compartments for splurge.
Note: If the above descriptions are inapplicable to troubleshooting, do not disassemble and repair it yourself.
Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Contact the brand
helpdesk. This product should be serviced by an authorized engineer and only genuine spare parts should be
used.
When the appliance is not in use for long periods, disconnect from the electricity supply, empty all foods and clean
the appliance, leaving the door ajar to prevent unpleasant smells.
13