15
Instal
lation and Set
u
p
Installation and Setup
To use your MX240a unit, the software and hardware must
be properly installed on your computer. Before you begin
installation, make sure your computer meets the minimum
requirements (see page 10).
Software Installation
Action
1
Insert the MX240a software CD-ROM into your
PC’s CD tray.
2
The Setup Wizard screen opens. Read the
instructions on the screen and click Next. If the
Setup Wizard screen does not open
automatically, click Start on the Windows toolbar
and select Run from the menu. At the prompt,
type the drive letter of your CD-ROM followed by
setup.exe, then click OK. For example, type:
D:\setup.exe
3
The License Agreement screen opens. Read
each document, click “I Agree”, and click Next
each time to agree to the terms.
1041b80a.book Page 15 Friday, January 31, 2003 9:42 AM