PMP 400 and PTP 200 Series
Canopy User Guide Supplement
Issue 3, January 2009
Page 24 of 45
Figure 6: Region Code on AP “Configuration => General” page
An SM or BHS has both a configurable Region Code and, once it registers to an AP or BHM, an
active Region Code. After an SM/BHS registers to an AP/BHM, it uses the Region of the AP/BHM
to determine its DFS behavior and displays the AP’s or BHM’s Region Code on its Home =>
General Status page, as shown in Figure 8.
The two Region Codes should be the same in normal operation, but will not be the same if, for
example, as shown in Figure 7 and Figure 8, an SM configured with a Region Code of “None” has
registered to an AP with a Region Code of Europe.
