Motorola 3200, Руководство пользователя

Страница: 59 / 146

RF-Conductor! Controller NIU Remote Configuration Alignment Commands
May 1998 6880494G55-O 3-9
Setting GPS Offset
This command is used to compensate for the propagation time through the base transmitter.
Once the new offset is set, perform a maintenance command to ensure that the offset value
entered provides the appropriate results.
1. From the Alignment menu, use the
<tab>
to position the cursor to the left of the listing
Set GPS Offset
and press:
<Return>
(see Figure 3-8).
Figure 3-8: Alignment Menu—Set GPS Offset
2. The Select Sign screen appears. Position the cursor to select Positive or Negative and
press:
<Return>.
3. The Select Offset screen appears. Position the cursor to select Absolute or Relative and
press:
<Return>.
Absolute value: the transmitter takes in the given value.
Relative value: offsets the current delay value in the transmitter.