Sarix Professional 4 Bullet Camera Installation Manual
C6726M | 11/22
19
Resetting to Factory Default Settings
If the device no longer functions as expected, you can choose to reset the device to its factory default
settings.
Use the firmware revert button to reset the device. The firmware revert button is shown in the following
diagram:
The firmware revert button in the Configuration Panel.
1. Ensure the device is powered on.
2. Using a straightened paperclip or similar tool, gently press and hold the firmware revert button.
3. Release the button after three seconds.
Do not apply excessive force. Inserting the tool too far may damage the camera.
For More Information
Additional information about setting up and using the device is available in the following guides:
l
Pelco Sarix Professional 4 Bullet Camera Operations Manual available on the Pelco website:
.
l
Camera Configuration Tool User Guide
Pelco Troubleshooting Contact Information
For further assistance, contact Pelco Product Support at 1-800-289-9100 (USA and Canada) or +1-559-
292-1981 (international).
Do not try to repair the unit yourself. Leave maintenance and repairs to qualified technical personnel
only.
