Motorola solutions EVX-261, Руководство по эксплуатации

Страница: 20 / 28

18 EVX-261 O
pErating
M
anual
a
dvanced
o
Peration
d
ual
W
atch
The Dual Watch feature is similar to the SCAN feature,
except that only two channels are monitored:

The current operating channel

The Priority channel.
To activate Dual Watch:
r
Press, (or press and hold), the assigned PF key to acti-
vate the Dual Watch feature.
r
The scanner will search the two channels and pause
when it finds a transmission on either channel.
To stop Dual Watch:
r
Press, (or press and hold), the assigned PF key to dis-
able the Dual Watch feature. The radio receives the
channel which was selected by the CH Selector knob.
F
olloW
m
e
s
can
The Follow Me Scan feature checks a user-assigned pri -
ority channel in addition to the channels previously pre-
programmed into a radio’s scan list. For example, if only
Channels 1, 3, and 5 (of the 8 available channels) are
designated for “Scanning”, the user may assign Channel 2
as the “user-assigned” priority channel via the Follow Me
Scan.
To activate Follow Me Scan, first select the channel you
want to designate as the “user-assigned priority channel”
by positioning the CH Selector knob on the desired “pri-
ority” channel. Next, press, (or press and hold), the as -
signed PF key. Finally, rotate the CH Selector knob to the
desired “operating channel”.
The scanner will search the two channels (user-assigned
priority channel and operating channel) and pause when it
finds a transmission on either channel.
ta
(
t
alK
a
round
)
s
can
Press, (or press and hold), the assigned PF key to toggle
the TA Scan feature “On” and “Off”.
When operating on a duplex channel system (for example,
a repeater station), TA Scan allows the transceiver to
search both transmit and receive frequencies on your du -
plex system.
When a signal is encountered on the receive frequency,
the transceiver will pause until the signal disappears.
When a signal is encountered on the transmit frequency,
the transceiver will check for activity on the receive fre-
quency every few seconds (interval programmed by your
Motorola Solutions dealer).
Note
: The TA Scan feature does not activate on a Simplex
Channel.