Option
Actions
Emergency Call with Hot Mic
Speak into the microphone.
NOTE:
The Hot Mic applies to the first
voice transmission from your ra-
dio during the Emergency call. For
subsequent transmissions in the
same Emergency call, you must
press the
PTT
button.
3
Exiting Emergency Operation on page 55
.
9.4
Exiting Emergency Operation
If an Emergency operation is triggered on your radio, the dispatch console or radios configured
as Supervisor can exit the Emergency operation and cancel emergency mode of other radios. The
dispatch console must be programmed to use this feature.
Procedure:
1
To exit Emergency, perform one of the following:
Option
Actions
Exiting Emergency Oper-
ation
a
From the
Home
screen, swipe down the
Status Bar
.
b
Tap
Cancel
and confirm the action by tapping
Yes
.
Exiting Emergency as
Supervisor (Trunking On-
ly)
• If the emergency mode is initiated by other radios, press
and hold the
1-Dot (Side Middle)
button, and press the
Emergency
button.
• If the emergency mode is initiated by the Supervisor, per-
form one of the following:
• Press and hold the
Emergency
button.
• Press and hold the
1-Dot (Side Middle)
button, and
press the
Emergency
button.
• Wait for console to clear emergency.
NOTE:
The combinations of the following buttons
are supported in your radio:
• Radio
1-Dot (Side Middle)
and
Top (Orange)
buttons.
• Radio
1-Dot (Side Middle)
and accessory
Top (Orange)
buttons.
• Accessory
1-Dot Button
and radio
Top (Orange)
button.
• Accessory
1-Dot Button
and accessory
Orange
button.
Exiting Emergency Via
Console (Trunking Only)
Radios configured as console only are not able to cancel
emergency mode from the radio. The dispatch operator or
supervisor must clear the emergency. Contact your system
administrator for more information.
MN009207A01-AA
Chapter 9 : Emergency Operation
55