5A
5B
85mm
31mm
116mm
75mm
26mm
EN
EN
TECHNICAL SPECIFICATIONS
03. CONTROL BOARD
1 •
Connect antennas in accordance with:
WF
: WiFI
RF
: radio frequency
2 •
Fix the MCONNECT Bridge to the wall.
Note •
Use the fixing template shipped with the product.
04. INSTALLATION
DEVICE FIXATION
• Power Supply
12/24V ac/dc or Micro USB
• Output relay power
30Vdc 1A
• Input
12/24Vdc
• RF communication distance
100m open field
• Wi-Fi range
50m open field
• Type of relay contact
Tension free
05. CONFIGURATION
ADD MODULE IN IN THE APP
1 •
Open
MCONNECT
app.
2 •
Login
.
3 •
On the home page press the "+" button at the top right.
4 •
Press
Add new MCONNECT
.
5 •
Accept all requested permissions.
6 •
Turn on the power.
7 •
Check that the module is in pairing mode (flashing purple).
Note
• if it is not in pairing mode it is necessary to reset.
8 •
Read the QR Code on the module box.
9 •
If you prefer or don't have the QR Code, can change the button
to
Scan nearby
and select the module in the devices found.
10 •
Enter the name and password of the Wifi network you are
connected to.
11 •
Wait for add process be complete.
ADD EXTERNAL DEVICES TO MODULE
1 •
Open the
MCONNECT
app.
2 •
Login
.
3 •
On the external device, for example in an automation, enter the programming mode for new remote
controls.
4 •
In the app, press the remote control you want to program and then the desired key until the motor
starts moving.
5 •
The programming is complete and you can now control the device through the app.
REMOVE MODULE FROM THE APP
1 •
Press on the device you want to remove.
2 •
Press on the icon with a gear symbol on the upper right
side of the screen.
3 •
Press
Remove MCONNECT
.
4 •
Confirm.
