Motorline professional MC41SP, Руководство пользователя и инсталлятора

Страница: 7 / 8

6A 6B
EN EN
04. PROGRAM 04. PROGRAM
The control board has the following functions:
01 • Press the P button for 4 seconds to the control board enter programming mode until the display shows
P1 message.
02 • Press the P button again for 2 seconds until the display shows the current setting.
03 • Use the A and D buttons to select the aperture force you want: F1 (minimum) to F9 (maximum).
04 • Press the P button for 2 seconds to confirm the setting and return to the stand-by mode (--).
Make sure that the selected value is appropriate to stop the gate movement whenever you encounter an
obstacle.
The opennign force is factory set at the F5 value.
MENUS FUNCTIONS
P3 - PHOTOCELLS
P1 - OPENING FORCE
P1 PROGRAMMING OPENING STRENGTH - F1 (minimum) to F9 (maximum)
P2 PROGRAMMING CLOSED FORCE - F1 (minimum) to F9 (maximum)
P3 PROGRAMMING SECURITY PHOTOCELLS - enable/disable
P4 PROGRAMMING AUTOMATIC DOOR CLOSURE TIME - 01 to 99 seconds
P5 PROGRAMMING FUNCTION CONDOMINIUM - enable/disable
P6 PROGRAMMING TIME OF WORK - 05 to 90 seconds
P7 PROGRAMMING PARTIAL OPENING - 01 to 10 seconds
01 • Press the P button for 4 seconds to the control board enter programming mode until the display shows
P1 message.
02 • Press the A button as many times as necessary until P2 appears.
03 • Press the P button again for 2 seconds until the display shows the current setting.
04 • Use the A and D buttons to select the locking force you want: F1 (minimum) to F9 (maximum).
05 • Press the P button for 2 seconds to confirm the setting and return to stand-by mode (--).
Make sure that the selected value is suitable for reversing the gate movement whenever you encounter an
obstacle.
The locking force is factory set at the F5 value.
01 • Press the P button for 4 seconds to the control board enter programming mode until the display shows
P1 message.
02 • Press button A as many times as necessary until P3 appears.
03 • Press the P button again for 2 seconds until the dispaly displays the message H0 (photocells inactive)
or H1 (photocells active).
04 • Use the A and D buttons to select the function you want: H0 (photocells inactive) or H1 (photocells active).
05 • Press the P button for 2 seconds to confirm the function you have set and return to standby mode (--).
The photocell function is deactivated at the factory.
The programming of each of the functions is done using the P, A and D keys, the P key is to
select the function and A and D to scroll through the menus.
When one of the functions P1 to P6 is selected for more than 20 seconds without
programming, the control panel automatically exits the programming mode.
P2 - CLOSING FORCE
P4 - AUTOMATIC DOOR CLOSE (ON/OFF)
01 • Press the P button for 4 seconds to the control board enter programming mode until the display shows
P1 message.
02 • Press button A as many times as necessary until P4 appears.
03 • Press the P button again for 2 seconds until the display shows the current time.
04 • Use the A and D buttons to select the auto-lock time you want: 01 to 99 seconds. Selecting 00 deactivates
the automatic closing.
05 • Press the P button for 2 seconds to confirm the time you have set and return to standby mode (--).