background image

10A

10B

45mm

45mm

45mm

45mm

Padieira

7mm

7mm

5mm

100mm

105mm

EN

EN

03. THE DOOR

04. INSTALLATION

03. THE DOOR

UNLOCK

PRE-INSTALLATION

MEASURES

• LINTEL FOR GLASS DOOR WITH ALUMINUM FRAME

Semi-visible mode - 

Superior 

aluminum profile stays visible 55mm 

from the outside to create a visible 

55mm frame all around (220mm of 

minimum lintel).

Leaf 

height

Leaf width

Leaf Width:

Leaf height:

45mm(frame)+Leaf width+45mm(frame)

70mm (frame)+Leaf 45mm(frame)

Wall

• PRE-INSTALLATION CONDITIONS AND VERIFICATIONS

• GENERAL INSTALLATION LOCATION

 • Make sure that the surface which is going to receive the door is level and upright.

 • Floors should be smooth, uniform and level.

 • The site should be free from shock and vibration.

 • Check that the ambient temperature values are admissible for operation of this door.

 • Perform the entire installation with the power off.

 • Consult the manufacturer's instructions of all components to install.

• ELETRIC LOCK

The electric lock is a security system that creates an automatic lock of the glass doors thus 

preventing burglary and increasing the safety of the space.

After triggered (door locked), the electric lock can be 

unlocked by pulling the safety lever down.

Unlock

Selector

Photoc

ells

• GLASS WITH ALUMINUM FRAME (MOBILE)

ATTENTION: 

The aluminum frames from 

the fixed leaves presents different 

measures of moving leaves. The 

measure is 45mm in all profiles.

Clear

Passage

Height

Clearance

to the

ground

(Ground level)

Guias

Guias

Radar A

Radar B

Содержание KAPV100























Отзывы: