MotorGuide Xi3 Wireless Edition, Руководство по эксплуатации, обслуживанию и установке, Страница: 41 / 45

Symptom Possible Cause Resolution
Motor failure
(motor does not run)
Weak trolling motor
batteries
Check the battery charge indicator
on the trolling motor. Recharge or
replace the battery as required.
Batteries in the foot
pedal or handheld
remote need
replacement
Refer to
Troubleshooting the
Foot Pedal and Handheld
Remote
.
Loose or corroded
battery
connections
Inspect battery connections for
cleanliness and tightness.
Wiring or electrical
connection faulty
Wire gauge from the battery to the
trolling motor is insufficient.
6‑gauge wire is recommended.
Loose electrical
connections
Inspect connections for
cleanliness and tightness.
Thermal protection
is overloaded
Disconnect the trolling motor
batteries and check for weeds or
debris around the propeller.
Temperature exceeds
specification. Contact a Service
Center.
Fuse or circuit
breaker is open
Replace the fuse or reset the
circuit breaker only after
determining the root cause of the
problem.
Magnets interfering
with armature
Turn off the power and manually
rotate the propeller. If the propeller
does not rotate freely with a slight
magnetic drag, contact a Service
Center.
Boat wiring faulty Contact a Service Center.
Inaccurate
temperature reading
(models with internal
sonar)
Lower unit not fully
submerged
Adjust the depth of the motor.
Ensure the lower unit is fully
submerged. Refer to
Adjusting
the Motor Depth
.
Damaged nose
cone
Contact a Service Center.
Damaged sonar
cable
Contact a Service Center.
OWNER SERVICE ASSISTANCE
eng
35