5
TO REPLACE THE BATTERY IN THE USB PROGRAMMER
(DONGLE)
1. Remove the screw from the USB Programmer (Dongle).
2. Remove the retaining nut from the NMEA 2000 port.
3. Remove the Top Plastic Cover.
4. Replace with a new 9v battery
NOTE: USB PROGRAMMER (DONGLE) BOARD IS NOT
ATTACHED TO USB PROGRAMMER (DONGLE) CHASSIS ONCE THE SCREW HAS
BEEN REMOVED. WHEN REMOVING THE BATTERY, USE CARE TO AVOID DAMAGE
TO THE BOARD.
5. Install the top plastic cover on the USB Programmer (Dongle) with the screw.
6. Intstall the NMEA 2000 Retaining Nut.
7. USB Programmer (Dongle) is ready for normal operation.
A
B
C
A.
Retaining Nut
B.
Screw
C.
Top Plastic Cover
D.
USB Programmer
(Dongle)
D
A.
USB Programmer
(Dongle) Board
B.
Battery
C.
USB Programmer
(Dongle) Chassis
A
B
C
