Auto ON/OFF
– Tour ES turns itself ON when deployed to the
run position and turns itself OFF when stowed. Operation has
never been so simple. Swing the motor into the water (run
position) and fish. When you have finished, hit the STOW
button, which will position the motor to land on the bracket
channel, and pull it back into the boat and onto the bracket.
SE Motor Control
– Tour ES uses the latest in micro processor
technology to monitor the motor performance at any speed and
prevent damage. You can run it in the weeds at full power, or
take advantage of maximum thrust for extended periods of time.
The Smart Electronics prevent the motor from drawing
excessive power, which conserves battery power and protects
the motor from overheating. The result is superior thrust when
needed and longer battery life for your fishing trip.
Straight Line Steering
– The foot-pedal has a center detent
position which is calibrated to drag the boat in a straight line.
Whenever you want the boat to be pulled in a straight line,
simply rock the pedal to the center detent position and press
constant on.
Note
: this feature is dependent upon user calibration.
HOW TO OPERATE MOTOR
Stow the Motor
Push and release the stow button once. The lower unit will
rotate to its stow position and all pedal functions will cease. Set
the motor on the bracket (horizontal) and it will turn off. Unplug
motor for trailering and storage.
Turn On the Motor
All you have to do is plug motor into power source, then use pull
rope to lower motor into the RUN position.
Steer the Motor
Steering Tip
Use the 400 degree steering range to help you maneuver in
tight spots. With mechanical cable driven steering you had to
rock the pedal to one extreme and then the other to try to back
your boat up when your fishing among docks or heavy timber.
But Tour ES’s 400 degree power steering lets you rock the
pedal to either extreme and actually point the motor past
straight back. Now you can make the minor corrections needed
to back up your boat.
TO SELECT TROLLING MODE
Momentary
This mode allows the motor to run each time you step on a
momentary button, when released the motor stops. When the
button is pressed, the motor will turn at a speed controlled by
the setting of the speed wheel. The left momentary button is
always a Constant off button, regardless of whether or not it has
been selected as a momentary button.
Constant on
This mode allows the motor to run constantly at the speed
selected. Press this button once and the motor will turn at a
speed controlled by the speed wheel. Press and release again
to stop motor or depress the Constant off momentary button.
Adjust speed
The speed wheel allows variable speed selection ranging from
speed 1, being the lowest speed, and 10 being the highest
speed. Use your foot to roll the speed wheel to the desired
speed.
First time setup
We want your first experience with your new Tour ES motor to
be a successful one. And since we like reading owner’s
manuals about as much as you do, we have developed this
quick reference guide for you to keep in your boat.
Please take your time and walk through the following setups.
You will learn how to calibrate your stow and straight ahead
setting position to maximize the motor’s full potential.
11
GB
c
e
a
b
d
a. Selectable momentary
buttons
b. Stow/Run button
c. Constant on button
d. Speed wheel
e. Constant off button
a
b
a. Left Turn
b. Right Turn
90-10235R21 502