© Motor City Wash Works, Inc. 48285 Frank, Wixom Michigan 48393 U.S.A.
Phone: 248.313.0272 ▪ Fax: 248. 313.0271
8MANULWPBRINS01 11-18-20 REV 1.0
www.motorcitywashworks.com
1
PIVOTING WHEEL BLASTER INSTALLATION MANUAL
Part #:7AXISAIRPNL0002, 3, 4 & 7WHELBLSTRDRV01, 02 & 7WHELBLSTRPAS01, 02
TABLE OF CONTENTS
Equipment Utilities
Page: 1
Equipment Specifications
Page: 1
Suggested Tools and Installation Materials
Page:
1
Installation Instructions
Page:
2
Maintenance
Page: 6
Troubleshooting……………………………………………………………………………………………………..…Page :14
Warranty………………………………………………………………………………………………………………..Page: 17
Equipment Utilities
Equipment Specifications and Features
Leg Weldment:
Height: 18-1/4”
Slot: From the Floor, the Height is 4-3/16” (H), Slot Length is 10” (L), Traveling Distance is 5-1/2”
Integrated Aluminum H
2
O Filter
Integrated Pneumatic Air Cylinder, Mechanically Pivots the Manifold
Three Positions to Set Desired Pivoting Angle:
Furthest: Approx. ± 15
°
Middle: Approx. ± 20
°
Inside: Approx. ± 25
°
Suggested Installation Tools and Materials
Safety Goggles
Hammer
Measuring Tape
Wedge Anchor Bolts 1/2”
Torpedo Level
Amp Meter/Volt Meter
Hammer Drill with Required bits
Wire Stripper
Standard Allen Wrenches
Teflon Tape
Set of Standard Combo Wrenches
1/4” OD Polyflow Tubing
Three & Six Nozzle Pivoting Wheel Blaster, 120 VAC / 24 VAC / 24 VDC Air Panels
ELECTRICAL
POWER: 120 VAC / 24 VAC / 24 VDC
PNEUMATICS
25-50 PSI OPERATING PRESSURE
WATER
RECLAIMED OR FRESH:
THREE NOZZLE: 9 GPM
SIX NOZZLE: 18 GPM
