model no. 140-0050-6 | contact us 1-888-942-6686
16
aSS
embl
y
NOTICE:
depending on the location of the solenoid/contactor, you may need to use the black and red cables in
place of the yellow and blue, and the yellow and blue in place of the red and black.
Check for proper drum rotation. Turn the clutch to the “Out” position (free spooling). Pull out some
cable from the drum, and then turn the clutch to the “In” position to engage the gears.
11
12
clutcH
out
out
in
in
Press the “Out” button on the mini-rocker switch. If the drum is turning and releasing more cable/rope,
then your connections are accurate. If the drum is turning and collecting more cable/rope then reverse
the leads on the motor. Repeat and check rotation. Press the “In” button on the mini-rocker switch as a
final test.
