Australian owned
Australian designed
Motolux is a world-class manufacturer of motorisation products and systems dedicated to window covering markets
worldwide. A designer and manufacturer of a fully integrated range of motorisation solutions, Motolux products are
suitable for commercial or residential use. Our high quality product range is streamlined to simplify the process of
manufacturing, installation and ongoing maintenance of almost any type of motorised window covering product.
61 (0)3 9876 0400
[email protected]
www.motolux.com.au
Ordering Information
Australia / New Zealand
PROGRAMMING INSTRUCTIONS 3/3
Example: Putting 5 Curtains all on Channel Six
To Add Multiple Curtains to a Group Channel
1.
On the remote, go to
Curtain 1
on
Channel 1
. Push and
hold
the
STOP
button for approximately
5 seconds
, the light on the
motor will slowly flash
RED
.
2.
Go to
Channel 6
on the
remote control
and push the
UP button
. The light will change from flashing
RED
to
3 BLUE
flashes,
indicating that pairing was successful. Curtain 1 has now been added to Channel 6.
3.
On the remote, go to
Curtain 2
on
Channel 2
. Push and
hold
the
STOP
button for approximately
5 seconds
. The light on the
motor will slowly flash
RED
.
4.
Go to
Channel 6
on the remote control and push the
UP button
. The light will change from
flashing RED
to
3 BLUE flashes
,
indicating that pairing was successful. Curtain 2 has now been added to Channel 6.
Repeat these steps until you have moved all Curtains over to Channel 6.
This feature can also be used to transfer motors across to other remote controls.
Turning the Touch and Go Function On and Off
1.
On the bottom of the motor, using a paperclip or small screwdriver,
push and hold the PROGRAMMING button
for a
total of approximately 10 seconds. The light on the motor will start
flashing slowly RED
after approximately 3 seconds,
then
flashing RED
again in 6 seconds, and finally
flashing BLUE
, indicating that the feature has been turned off/on
Test the operation of Touch and Go.
REVISION 2 - 2020
Curtain Motor 1.5Nm 240V AC Hybrid Power - 592130000 (MR68-1.5/100-EM-P)
Motor A
MODE 1: Power Connection
Remote Control. Dry Contact. RS485 Control.
4 Wire Active Switching Control
MODE 2: Power Connection
Notice
Motor B
Antenna
Program Button
Port 1
Port 2
Manual COM Line
Series P
ort B
Manual Up Line
Manual Stop Line
Manual Down Line
Series P
ort A
LED Indicator
External manual switch is dry contact mode,
function of both ports keep the same.
Impulse Manual Switch
PC Control
Available for RS485 control
Available for more motors
AC 100V~240V
Socket Diagram
Manual control line can be 30M
Blue = Neutral
Brown = Live
Yellow/Green = Earth
AC 100V~240V
Blue = Neutral
Brown = Down/Up
Yellow/Green = Earth
Black = Up/Down
AC 230V 50/60Hz
