www.motoalliance.com
1-866-527-7637
PARTS LIST
(8) 5/16” Nylock Nut
(4) 5/16” x 1.5” x 2.25” u-bolt (42021)
Plow Mount Assembly:
To install the plow mount to the underside of the
vehicle install the front two U-bolts PN 42021, and
loosely tighten the 5/16” nuts. Pull the plow mount back
in the furthest position and then fully tighten, as shown
in Figure 2.
For the Kawasaki Prairie 360 use the second set of U-
bolts PN 61262 and securely tighten around the frame in
hole location (B).
For Kawasaki Brute Force 650 and Suzuki Twin Peaks
700 drill a 3/8” hole through the aluminum skid plate,
using the plow mount as a template, as shown in Figure
3. Repeat the same process on the other side.
After both holes are drilled attach the mounting plate
with the second set of U-bolts PN 42021 and securely
tighten around the frame in hole location (A).
Tighten all fasteners securely. Torque 5/16” Bolts: 20ft.
lb.
Plow Installation:
Slide the plow into position with the tubes under the
ATV.
Lift the end of the tube assembly into position so the
holes in the Tube Wings line up with the 3/8” holes in
the frame brackets (Fig. 2).
If using a winch, mount the plow in the rear holes using
the 3/8” pins that came with the plow kit. If using the
electric actuator or manual lift, mount the plow in the
forward holes.
A Phillips head screwdriver may be used to align the
holes.
Hole Locations
