MA11922
23001 Industrial Blvd
VIPER Yamaha YXZ Winch Mount
Rogers, MN 55374
866.527.7637
866.527.7637
8
10. Guide your winch gear end first behind the driver side front shocks and into the open cavity above the winch
mount.
Note:
If you have a one piece line stopper and it doesn’t fit over the eyelet on the end of your
winch cable you will want to remove your cable before this step, put the line stopper on your
cable and slide it to the end of the cable, and then thread the cable through the fairlead, through
the center of the winch mount and then out to the winch and reinstall it before putting the winch
into place.
Figure 8
11. You may need to reroute some wires and cables on your machine to allow the winch to sit flush on your
mount plate.
12. Use the hardware supplied with your winch to attach the winch to the MA11922-1 Main Mount Plate and route
your cable through the center hole of the mount plate and out the fairlead if you haven’t already.
13. Follow the instructions for wiring up your winch included in your winch manual.
14. Most applications will mount the contactor in the center console near the battery. There is also space behind
the winch and in front of the radiator. It may be necessary to remove the center console to route the winch
wires from the mount to the battery.
15. Recheck and tighten down all hardware after the first couple times driving your machine and before every
winching season as the frame may have flexed causing the hardware to loosen.
