MotoAlliance
MA11981 Kubota RTV 900/1140
23001 Industrial Blvd
Rogers, MN 55374
866.527.7637
866.527.7637
4
6.
Use the provided M8 Hardware to mount up through your machine and mounting
plates and into your winch as shown in Figure 3.
7.
Once the winch is mounted securely, attach the Roller Fairlead or Aluminum
Hawse fairlead to the front of the MA11981-1 Main Mounting Bracket.
8.
Pass the cable through the Rubber Line Stopper and then through the Roller
Fairlead or Aluminum Hawse. Leave the cable unattached at this point. After the
winch is fully installed, reattach the cable to the winch. Leave the cable unwound
as it will be wound under load to properly set the cable. See Figure 3.
Figure 3
9.
Follow the instructions in your Winch manual to wire up your winch.
10.
Kubota provides a mounting location for the c
ontactor under the driver’s seat but
depending on the style of contactor in your winch you may need to redrill the
mounting holes or mount the contactor elsewhere.
11.
Once the winch is wired up properly, tie the end of the cable off to a secure
location (such as a tree, a post, or a full sized truck), set the brake on the
machine and wind the winch in carefully (following the duty cycle noted in your
winch operations manual), watching to make
sure the cable doesn’t become
tangled. This will help set the cable and prevent future tangles.
