Motoalliance DENALI MA11748 Скачать руководство пользователя страница 4

Страница: 4 / 5

MA11748

23001 Industrial Blvd

DENALI Can-Am Defender Plow Mount

Rogers, MN 55374

866.527.7637

3. Lift the MA11748 Plow Mount (part #1) into place as shown in Figure 2. Secure with

four

(4) 3/8” Serrated Flange Nuts (part #4) and two (2) 5/16” Serrated Flange Nuts

(part #6), (circled in red) but do not tighten down at this time.

4. Verify that the MA11748 Mount Plate (part #1) is pushed back flush against the front

bumper, then tighten down the four

(4) 3/8” Serrated Flange Nuts (part #4) and the

two (2)

5/16” Serrated Flange Nuts (part #6) (circled in red) as shown in Figure 2.

5. Using the four holes at the top of the front tab of the MA11748 Mount Plate (part #1)

drill two holes into the front plate of your bumper. Verify the location matches the
four bolts (circled yellow) in Figure 2

. Always check to make sure there won’t be any

interference before drilling, because bumpers can change from year to year and
model to model.

Figure 2

Содержание DENALI MA11748

Страница 2: ...lliance com Please verify that all hardware and parts are included in your package Kit Contents Part Qty Description 1 1 MA11748 Plow Mount 2 2 Z Bracket 3 8 3 8 x 1 Serrated Flange Bolt 4 4 3 8 Serrated Flange Nut 5 2 5 16 x 1 Serrated Flange Bolt 6 2 5 16 Serrated Flange Nut 7 4 3 8 Nylock Nut MA11748 Plow Assembly View ...

Страница 3: ...hang the Z Bracket part 2 over the square tube frame between the A Arms as shown in Figure 1 2 Insert four 4 of the 3 8 x 1 Serrated Flange Bolts part 3 from the top of each Z Bracket part 2 as shown in Figure 1 circled in red Insert two 2 of the 5 16 x 1 Serrated Flange Bolts part 5 from the holes in the A Arm mount as shown in Figure 1 circled in green Figure 1 ...