manualshive.com logo in svg

Motoalliance Denali MA11737, Руководство пользователя, Страница: 3 / 4

Поделиться
Скачать
Motoalliance Denali MA11737 Скачать руководство пользователя страница 3

MotoAlliance 

 

MA11737

 

 
 
 

 

866.527.7637 

 

MA11737 Plow Mount Installation

1.  Remove the bumper metal casing shown in Figure 

Phillips screw driver. 

2. 

Slide the plow mount over the front end of the Teryx 4
two holes with the forward most holes on th
the mount using the 3/8'' bolts, washers and nuts included in your kit, do not 
tighten them at this time as they will be removed later to add the winch mount.  In 
this step, the bolts will locate the plow mount for the l

 
 

23001 Industrial Blvd

 

Rogers, MN  55374

 

3 

motoinfo

Plow Mount Installation 

 

Remove the bumper metal casing shown in Figure 2 using a M10 wrench and 

Figure 2 

 

Slide the plow mount over the front end of the Teryx 4 or Teryx 2 and align the 
two holes with the forward most holes on the front end.  See Figure 
the mount using the 3/8'' bolts, washers and nuts included in your kit, do not 
tighten them at this time as they will be removed later to add the winch mount.  In 
this step, the bolts will locate the plow mount for the later steps.

 

Figure 3 

 

23001 Industrial Blvd 

Rogers, MN  55374 

866.527.7637 

[email protected]

 

using a M10 wrench and 

 

and align the 

e front end.  See Figure 3.  Secure 

the mount using the 3/8'' bolts, washers and nuts included in your kit, do not 
tighten them at this time as they will be removed later to add the winch mount.  In 

 

Содержание Denali MA11737

Страница 1: ...TV SxS and or plow system can cause death or injury please use caution and common sense when operating your unit Read your Plow Operator s Manual your Winch Operator s Manual and all warning labels before operating your UTV SxS Operate your SxS at a walking speed with the blade installed Do not exceed 5 mph 8 km h even with the blade up Do not operate the UTV SxS on slopes greater than 10 degrees ...

Страница 2: ...e verify that all hardware and parts are included in your package Kit Content Please refer to Figure 1 Item Qty Description 1 1 MA11737 Plow Mount 2 1 Winch Spacer 3 2 3 8 16 x 1 00 HH G5 Bolt 4 2 3 8 Flat Washer 5 2 3 8 16 Nylock Nut G5 6 4 5 16 18 x 3 3 4 HH G5 Bolt 7 4 5 16 Flat Washer 8 2 Hold Down Buckle Figure 1 ...

Страница 3: ...metal casing shown in Figure 2 using a M10 wrench and Figure 2 Slide the plow mount over the front end of the Teryx 4 or Teryx 2 and align the two holes with the forward most holes on the front end See Figure the mount using the 3 8 bolts washers and nuts included in your kit do not tighten them at this time as they will be removed later to add the winch mount In this step the bolts will locate th...

Страница 4: ... using the four 5 16 bolts and the two buckle pieces included in your kit Figure 4 Included in your plow mount kit is a spacer that is to be used in conjunction with the MotoAlliance winch mount Place the spacer behind the plow mount and on winch mounting area The holes in the spacer will line up with the rear holes of the Teryx 4 winch mount location Remove the 3 8 bolts from Step 2 align the win...

Отзывы:

Нет отзывов