Motion CM-40, Руководство пользователя, Страница: 29 / 92

5.1
5.2
5.4
5.3
5
6
6.1
6.2
6.3
6.4
MOTION CM-40 DC VERTICAL MOTOR
Pair a remote control that is suitable for vertical application.
Shortly press the program button on the
motor. The blind will start stepping, indicating
that program mode has been activated.
(The blind remains stepping until the program
mode is de-activated.)
Repeat steps 5.1 - 5.4 to remove a blind from
a channel.
Press the pair button on the back of the remote
control to pair the blind to the selected channel.
The blind will shortly stop stepping indicating
that the remote has been paired to the blind.
Select a desired channel for the blind using the
channel selection button on the remote control.
Shortly press the program button on the motor.
The blind will stop stepping, indicating that program
mode has been de-activated.
Pair a remote
Channel
Selection
Pair
button
Channel
indicator
Check direction of rotation Slide motor
Up
Down
Short
press
Shortly press the right button to check if the
blind moves the right way: away from the
motor. If the blind moves the other way, the
rotational direction must be changed.
Activate program mode by shortly pressing the
program button on the motor.
Simultaneously press the up and down button
to change the direction of rotation.
Shortly press the
program button on the
motor. The blind will stop stepping, indicating
that program mode has been de-activated.
English
11